Your homebrew is finally completed and you’ve reached the exciting bottling phase. It is a process that can race by or wind up at a standstill depending on the type of bottle capper you have.
There is more than one type of bottle capper too. They come in a number of sizes, made from various materials, and have different features such as height adjustment.
To help you pick out the best one, we reviewed five top-selling bottle cappers. There is an extensive buying guide also to further help you come to a decision.
Easy to adjust
|Home Brew Ohio Colt Strong Bench Capper|
|Red Baron Bottle Capper|
|Capper - Bench - Ferrari Deluxe|
Simple to use
|The Universal Capper Rigamonti Capper|
|Professional Bench Beer Bottle Capper|
The Home Brew Ohio Colt Strong Bench Capper might be right for those that seek an easy adjustment process. Said adjustments allow it to accommodate various bottle sizes from 3 in. to 14 in. in height, giving you the option to cap a larger variety of bottles. It’s designed to use with 26 mm caps.
It has good weight to it, coming in at 4lbs. The bench bottle capper is top-heavy, however. This can cause the capper to topple over if you set it down without anything to hold it in place. So, it might be best to mount it to keep it steady during the capping process.
Mounting may also help you hold it at a better angle. Even if you have to apply a lot of force for an accurate and tightly sealed cap, it isn’t uncomfortable to manage.
The Red Baron Bottle Capper may be good if you’re in need of a more economic option. It’s made from durable plastic material that should hold up well with standard usage.
Its minimal weight coming in at about 1lb and general ease of use can cause you to overextend it. This runs the risk of snapping the capper in half, so careful pressure may be best. Its size does allow for quick and easy storage anywhere you want.
It does offer an ideally tight seal with its 26.5 mm standard capping bell. The small magnet does well in holding the cap in place. It might be tough at times to remove it from the cap once it is sealed.
One of the most heavy duty bottle cappers, the Capper – Bench – Ferrari Deluxe is constructed using both plastic and steel. The combined material can have a quality sturdy feel so you know it may last a long time.
It’s not overtly tough though so your bottles are kept safe. The caps may experience some difficulty as the Ferrari Deluxe might dent them.
When you’re finished, the spring loaded lever arm pops back into place each time. This cuts down your bottling process even more.
The capper itself is 19 in. tall. Its capping height ranges from 4 in. to 12 in. tall. While you’re using this, it may be best to weight it down. There’s a possibility of it moving around otherwise.
The Universal Capper Rigamonti Capper might be the best bottle capper with a simplistic design. It’s compact and weighs just around 1lb. The size and weight can reduce any potential hand fatigue, especially if you have dozens of bottles that need capping.
This capper features a universal design. It may make it easier to cap an assortment of bottle sizes. This is stated to fit 26.5 mm caps though.
The Universal Capper Rigamonti Capper is made from durable, solid tempered steel. It features elastic pliers as well. This can increase its durability so it lasts for months on end under heavy use.
There’s a chance of it sticking to the cap after the seal is complete. Lubricating it prior to use may allow it to pull away easier and quicker.
A high-quality spring loaded capper, the Professional Bench Beer Bottle Capper offers fast and accurate capping. It features a magnetic bell to hold the cap in place so you don’t chase it around. The textured base is non-slip too so there’s little risk that the bottle will slide around. It may help you speed up the capping process.
Its magnetic bell does well in holding the cap in place. Sliding the bell from the bottle when complete is a simple process. The capping bell itself is removable too so you can replace it to handle larger or smaller sized caps.
The Professional Bench Beer Bottle Capper is otherwise user-friendly. It takes no time to press the button for immediate height adjustment. Variety is good with the capper also. It can fit standard beer bottle sizes as well as taller bottles like champagne or wine bottles.
Bottle Capper – Buying Guide
Before considering any of the bottle cappers in our above reviews, check out the following buying guide. It addresses important features to keep in mind so that you learn as much as possible to choose the one better suited to your purposes.
Type of Bottle Capper
Bottle cappers for home use are not made in a single design. There are two main types you’ll see: hand cappers and bench cappers.
Hand cappers tend to be the most economical option. They are compact and overall simplistic. Using them is straightforward, so if you’ve never done capping before, this type can help teach you the ropes.
A hand capper may be too easy at times to use though depending on what they are made of. In the case of plastic, lightweight hand cappers, overextending the capper can easily happen. This leads to it snapping in half. Understanding the amount of force you need is important in this case.
Hand cappers are also standardized in size. They only work on a single bottle-neck type so you can’t adjust the cap size.
When not in use, they are the simplest to store. You can toss them in a drawer or even leave it on the counter considering its relative small footprint.
The hand capper variety is also frequently found sold with other homebrewing kits.
The immediate difference you’ll notice between bench cappers and hand cappers is the size. Bench cappers are larger and feature a base and a lever. They are not the easiest to store or find counter space for.
What a bench capper does offer is a faster means of capping your bottles. It does not take much effort either. All that is needed is to push down a lever. Some are spring loaded to help you cap dozens of bottles in a short amount of time.
Adjusting bench cappers is simpler as well. Many feature a range of height options to accommodate various bottles. With an extra purchase, some even allow you to switch out the capping bell for different sized caps.
Bench cappers do tend to be more costly than hand cappers. They are heavier too, but you don’t need to worry about holding them while using them. Weight is only a real issue if the capper is not balanced out. Top-heavy bench cappers run the chance of falling over and breaking the bottles.
Some top-heavy bench cappers are designed with the option to mount or bolt. You’ll find a certain amount of holes drilled in to make the process smoother. Once mounted, they should function fine.
No matter the type of bottle capper you choose, both are capable of successfully sealing your bottles. How well depends on the capper itself.
Bottle cappers don’t always feature the same kind of material in their construction. You may notice that some bottle cappers, more so bench cappers, are made from some type of metal. The use of metal gives the capper good resilience to withstand hard, long use.
There are many other bottle cappers made from some type of plastic material. Depending on the kind used, they are still durable enough to last a long time under heavy use like their metal counterparts. Plastic can also help keep their weight down. Lower weight means less chance of developing hand fatigue.
With such low weight, plastic cappers run the risk of having too much flexibility to them. This can make it too easy to snap them in half.
There are also bottle cappers that make use of a mixture of material in their construction. For hand cappers, they may feature a mostly metal body with plastic or elastic handles. The spread of different materials can provide layers of durability where it is needed most.
Height and Cap Adjustability
It is common to encounter various sizes of bottles that require capping. If you’re in this situation, it’s best to have a bottle capper with a decent height adjustment range.
Some bottle cappers feature a more universal design, intending to make things easier. Some may still not fit all bottle sizes though, so testing them out before you’re too far into capping can save you time.
Bottle cappers without a universal design tend to state their height range. Some are wide, going from 4 in. to 14 in. to give you numerous of options. Others may simply offer two or three adjustment ranges.
Then you have to consider cap size. Not all bottle cappers are made with the intention of changing out the capping bell.
Ease of Adjusting
Adjusting the bottle capper for height or cap size should be simple. This keeps the bottling process moving along at a good pace. Some are designed with just a button, changing the height in mere seconds.
A process as delicate as bottle capping requires the item in question to have safety features. Your bottles will have less chance of shattering if so.
Some bench bottle cappers are constructed with a textured base. The base generally features a non-slip surface as well. It can free up how firm you hold the bottle in place as it keeps the bottle from moving about. This is not the case with hand bottle cappers though so those require a solid surface like a kitchen counter.
Bottle cappers also feature a magnetic bell. This magnet holds the cap in place during the capping process. It adds an additional layer of stability so there’s no risk of the cap slipping off.
Some bottle cappers even provide a sound or a sensation to let you know when the cap is sealed. It is a safety mechanism that keeps you from putting out too much force that can break the capper or bottle.
There are even spring loaded bench bottle cappers that feature an automatic lever. It generally goes back into place immediately after you are finished sealing the cap. This may also reduce the time it takes to cap the bottles.
Capping Your Bottles – A Breakdown
Bottle capping does not have to be a difficult task. The type of capper does come into play with how fast you can manage it and how much effort is needed.
You will first pick out a stable, hard surface to place your bottle on. Bench cappers are designed with a base, so all they need is room to sit up straight and flat. Hand cappers lack any base, so any flat surface like a kitchen counter is ideal.
Place the cap on the bottle. No matter which type of capper you are using, the process is the same. There is usually the magnet to keep the cap in place, and once you seal it, it should remove simply enough.
Some bottles are easier and safer to seal than others. The standard brown colored glass bottles may not work best. They are usually sturdy enough o handle the force from bottle cappers. Clear glass bottles tend to break more often than not.
Once you understand that the bottle is sealed, simply remove the capping bell. Hand cappers pull apart while bench cappers just need the lever released. The cap itself shouldn’t come off as long as the seal is tight enough.
Some capping bells may stick to the cap and bottle though. Caution is warranted regardless so that you don’t ruin the seal by cracking any glass.
Every proper home brewer should own a bottle capper whether it’s store bought or homemade. Without one in your arsenal, creating a secure, reliable seal on your caps can be difficult.
If you don’t have a clear idea where to begin your search, consider using our thorough reviews of top-rated bottle cappers to decide on one. The buying guide can also teach you more about them so there’s little in your way to finding the best bottle capper for your brewing needs.